|
High-precision T-Shaped blades for improved outlining, trimming and detail work.
Wahl T-Shaped Blades Fits:
(1) Sterling 6 Trimmer
Replacing your Blades:
(1) Remove the old blade set by removing the two screws.
(2) Clean excess hair from open end of trimmer with a small brush.
(3) Check new blade set to make sure that top blade moves easily back and forth on bottom blade.
(4) Position new blade set on trimmer by placing the small bump on cam follower into the center hole of top blade.
(5) Holding the blade set in place, replace the screws and tighten.
(6) Turn trimmer on to check for proper back and forth blade motion.
(7) If the blades do not operate properly, loosen screws and slightly lift blade set to check alignment as discussed in Step 4. Tighten screws and try again.
(8) Do not attempt any adjustments while trimmer is in operation. Always shut motor off first.
Ingredients is not available for this product
Customer Reviews:No reviews for this product.
|